diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dts b/arch/arm/dts/rk3568-nanopi-r5s.dts
index 1358c68fe0..e31b0cc730 100644
--- a/arch/arm/dts/rk3568-nanopi-r5s.dts
+++ b/arch/arm/dts/rk3568-nanopi-r5s.dts
@@ -527,6 +527,12 @@
 	num-lanes = <1>;
 	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
+
+	ranges = <0x00000800 0x0 0xf4000000 0x0 0xf4000000 0x0 0x100000
+		  0x81000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x100000
+		  0x82000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x1e00000
+		  0xc3000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>;
+
 };
 
 &pcie30phy {
@@ -538,6 +544,12 @@
 	num-lanes = <1>;
 	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
+
+	ranges = <0x00000800 0x0 0xf2000000 0x0 0xf2000000 0x0 0x100000
+		  0x81000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x100000
+		  0x82000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x1e00000
+		  0xc3000000 0x3 0x40000000 0x3 0x40000000 0x0 0x40000000>;
+
 };
 
 &pcie3x2 {
@@ -547,6 +559,11 @@
 	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
+
+	ranges = <0x00000800 0x0 0xf0000000 0x0 0xf0000000 0x0 0x100000
+		  0x81000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x100000
+		  0x82000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x1e00000
+		  0xc3000000 0x3 0x80000000 0x3 0x80000000 0x0 0x40000000>;
 };
 
 &pinctrl {